Zync 990 Plus

Download the official USB drivers for your Zync 990 Plus. If you were searching for the official drivers of Zync 990 Plus, you have come to the right place. We will guide you how can you download and install the USB drivers for your device. CDC and VCOM drivers are for Flashing the firmware and ADB drivers will help in simple connection of your device with your computer.

Download Zync 990 Plus Drivers

Zync 990 Plus ADB driver For Normal Connecting

Zync Z99 VCOM driver For Flashing Firmware

Zync Z99 ADB driver For Normal Connecting

Install Zync 990 Plus Drivers Manually

Step 1: Download the Drivers for Link provided above and extract them on your PC.

Step 2: Open Device manager and click on Legacy Hardware Menu.

Step 3: After opening Legacy hardware menu click Next.

Step 4: Then click Install the Drivers that I Manually select.

Step 5: Locate the drivers you extracted on PC and click Add.

Step 6: That’s all it will take to install the driver.

Step 7: You can see the installed driver on the installed Drivers list.

Notice:

  • If you are trying to Flash a Stock Rom on your Zync 990 Plus download only CDC and VCOM drivers as ADB drivers will not help in it.
  • You can Download the Stock Firmware of Zync 990 Plus from here.
  • If you face Driver Signature error while trying to install USB drivers for Zync 990 Plus please watch this video to bypass it.

Add a Comment

Your email address will not be published. Required fields are marked *